• Steber Steel Solutions is the world's premier Exporter of Fittings, Flanges, Pipes, Sheet & Plate etc.
Get Quote
Call For Emergecy+ (91) 9702472711

Hastelloy C22 Sheet & Plate

  • home
  • Hastelloy Sheet & Plate

Largest Stockists of UNS N06022 Coils, DIN 2.4602 Polished Plates, Alloy C22 Coils, Hastelloy C22 Sheets, Biggest Hastelloy C-22 Sheets & Plates, Hastelloy Alloy C22 HR Plates Manufacturer In India.

Hastelloy C22 Sheets & Plates

Steber Steel Solutions is a well-known stockist and trader of Hastelloy Alloy C22 Sheets & Plates, which is a nickel-chromium-molybdenum alloy renowned for its exceptional resistance to thermal fatigue. Thermal fatigue is a phenomenon that occurs when a material undergoes cyclic heating and cooling, resulting in stress accumulation and ultimately leading to failure.

Hastelloy C22's unique composition and microstructure contribute to its remarkable ability to withstand thermal cycling without compromising its mechanical integrity. We explore the resistance to thermal fatigue of Hastelloy UNS N06022 Sheets, including the factors affecting its performance, testing methods, and applications in high-temperature environments.

We provide the best quality Pure UNS N06022 Hot Rolled Sheets Specification Standard, werkstoff 2.4602 Shim Sheets, Hastelloy C-22 Cold Rolled Plates, Hastelloy C22 Sheets Stockist.

Several factors influence the resistance to thermal fatigue of Hastelloy WNR 2.4602 Sheets. These factors include:
a. Temperature Range: Nickel Alloy C22 Sheets exhibits excellent thermal fatigue resistance over a wide temperature range, typically from cryogenic temperatures up to approximately 1,100°C (2,012°F). Its ability to maintain its mechanical properties and resist fatigue is critical for applications subjected to extreme temperature fluctuations.
b. Heating and Cooling Rates: The rate at which Hastelloy UNS N06022 Plates is heated and cooled can impact its resistance to thermal fatigue. Rapid heating and cooling rates may induce higher stresses and increase the likelihood of fatigue failure. Controlled heating and cooling rates help mitigate these effects and improve the alloy's thermal fatigue performance.
c. Number of Cycles: The number of thermal cycles the alloy experiences can affect its resistance to thermal fatigue. Hastelloy WNR 2.4602 Plates demonstrates superior endurance under cyclic heating and cooling conditions, allowing for prolonged service life even in applications with frequent temperature variations.
d. Environmental Conditions: The corrosive environment in which Nickel Alloy C22 Plates operates can impact its thermal fatigue resistance. The alloy's exceptional corrosion resistance ensures that it maintains its mechanical integrity and performance in aggressive chemical environments, further enhancing its thermal fatigue resistance.

Hastelloy C22 Sheets & Plates Secifications

Specifications ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled Plate 0.5-6.4 mm
Hot rolled Plate 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
International Standard ASTM A480
ASTM A959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Tolerances (width / thickness) EN 10258/ DIN 59381)
EN 10151
EN 10088
Finish 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

Hastelloy Sheets & Plates sGrades

Hastelloy C22 Sheets & Plates Hastelloy C276 Sheets & Plates
Hastelloy B2 Sheets & Plates Hastelloy B3 Sheets & Plates

Hastelloy C22 Sheets & Plates Types

Hastelloy C22 Coils
Hastelloy C22 Coils
Hastelloy C22 Foils
Hastelloy C22 Foils
Hastelloy C22 Strips
Hastelloy C22 Strips
Hastelloy Alloy C22 Chequered Plates
Hastelloy Alloy C22 Chequered Plates
Hastelloy Alloy C22 Perforated Sheet
Hastelloy Alloy C22 Perforated Sheet
Hastelloy C22 Shim Sheets
Hastelloy C22 Shim Sheets

Hastelloy Alloy C22 Sheets & Plates Equivalent Grade

STANDARD WERKSTOFF NR. UNS JIS GOST EN
Hastelloy C22 2.4602 N06022 NW 6022 - NiCr21Mo14W

Buy Alloy C22 Sheet online, Check ASME SB575 Hastelloy C22 Plate Price List here. Stock of Hastelloy Alloy C22 Coils in Mumbai.


Thickness Chart OF Hastelloy C22 Sheets

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Thickness Chart OF Hastelloy C22 Plates

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Most Selling Types Of Hastelloy C22 Sheets & Plates

  • ASTM B575 Hastelloy C22 Slitting Coils
  • UNS N06022 Coils
  • Hastelloy WERKSTOFF NR. 2.4602 Sheets & Coils
  • Nickel Alloy C22 Sheets
  • Grade C22 Hastelloy Perforated Sheet
  • Alloy C-22 Shim Sheet Stockist
  • ASTM B575 Hastelloy C22 HR Plates
  • UNS N06022 Shim Coils
  • Hastelloy Alloy C22 Chequered Plate
  • ASME SB575 Alloy C22 Plates
  • Hastelloy® Alloy C22 Shim Sheets
  • Hastelloy C22 Cold Drawn Plates Manufacturer
  • UNS N06022 CR Plates Supplier
  • Hastelloy C-22 Plates
  • Alloy C22 Coils
  • Nickel Alloy C22 Cold Rolled Sheets
  • UNS N06022 Cold Drawn Plate
  • Hastelloy C22 Hot Rolled Plate
  • Hastelloy C-22 Polished Plates
  • Hastelloy C22 Foils
  • UNS N06022 Strip
  • ASME SB575 Alloy C22 Plain Sheets
  • Hastelloy Alloy C-22 HR Plates
  • ASTM B575 Hastelloy C22 Chequered Sheet
  • Hastelloy Alloy C22 Sheet Exporter
  • Hastelloy® Alloy C22 Finish Sheet
  • UNS N06022 Foil
  • Alloy C22 Perforated Sheets
  • Hastelloy Alloy C22 Chequered Plate
  • UNS N06022 2B Finish Plates
  • Hastelloy JIS NW 6022 Sheets Distributor
  • UNS N06022 Chequered Plate
  • Grade C-22 Hastelloy Hot Rolled Plate
  • Hastelloy DIN 2.4602 Finish Strip
  • Hastelloy® Alloy C22 Plates
  • UNS N06022 Circles Stockholder
  • Hastelloy DIN 2.4602 plate

Hastelloy C22 Sheets & Plates Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
Hastelloy C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20 – 22.50 2 – 6 12.50 – 14.50 0.02 max

Hastelloy Alloy C22 Sheets & Plates Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Best Supplier Of Hastelloy C22 Sheets & Plates in Following Countries

  • Exporting Hastelloy Alloy C22 Sheets & Plates to Below Countries
    Ukraine, Antananarivo, Austria, Spain, Accra, Kampala, Colombo, Mexico, UK, Jordan, Canada, Czech Republic, Taiwan, Libya, South Africa, Port Elizabeth, Lithuania, Greece, Finland, Switzerland, Omdurman, Mozabique, Estonia, Afghanistan, Maputo, Poland, Luanda, Russia, Benin, Bangladesh, Ethiopa, Subra al-Haymah, Portugal, Dakar, Iran, Tunisia, Cairo, Australia, UAE, Turkey, Japan, Italy, Brazil, Bolivia, Hong Kong, Sri Lanka, Giza, South Korea, Uganda, Lebanon, Lubumbashi, Netherlands, Iraq, Philippines, Houston, Colombia, Romania, Pretoria, Algeria, Dar es Salaam, Brazzaville, Mbuji-Mayi, Nairobi, Kolwezi, Belgium, Serbia, Port Harcourt, Myanmar, Jordon, Egypt, Addis Ababa, Israel, Bahrain, Cyprus, Tripoli, Kuwait, Kano, China, Croatia, United States, Douala, Lagos, Vietnam, Kenya, Abidjan, Netherland, Khartoum, Malaysia, South America, Saudi Arabia, Dubai, Mongolia, London, Gabon, Harare, Slovakia, Nigeria, Ouagadougou, Casablanca, Thailand (Bangkok), United Kingdom, Ecuador, Angola, Kazakhstan, Rabat, Yemen, Mogadishu, Sweden, Belarus, Austalia, Fez, Venezuela, Oman, Denmark, Mozambique, Johannesburg, United Arab Emirates, Africa, Phillipine, Bamako, India, Kuwait, Yaoundé, Azerbaijan, Kinshasa, Ghana, Durban, Costa Rica, Abu Dhabi, New Zealand, Trinidad and Tobago, Norway, Zaria, Ibadan, Bhutan, Germany, Kaduna, Indonesia, Conakry, Peru, Soweto, Freetown, Singapore, Morocco, Cameroon, Bulgaria, Chine, New York, Qatar, Cape Town, France, Sudan, Argentina, Bulawayo, Maiduguri, Hungary, Algiers, Alexandria, Pakistan.
  • Supplying Hastelloy Alloy C22 Sheets & Plates to Following Domestic Cities
    Blair, Calgary, Ho Chi Minh City, Aberdeen, Andhra Pradesh, Bansberia, Riyadh, Ulsan, Jamalpur, Madrid, Kerala, Baraut, Vung Tau, Delhi, Betul, West Bengal, Suryapet, Jeddah, Aurangabad, Nagpur, Nanded, Orissa, Courbevoie, Granada, Manipur, Secunderabad, Rio de Janeiro, Ahmedabad, Ludhiana, Waghala, Muscat, Patna, Hanoi, Caracas, La Victoria, Allahabad, Busan, India, Atyrau, Loni, Ambala, Udgir, Haryana, Muktsar, Karnataka, Tamil Nadu, Kurnool, Chandigarh, Assam, Jamnagar, Thiruvananthapuram, Mizoram, Guntur, Jodhpur, Tirunelveli, Kanpur, Dombivali, Bikaner, Howrah, Bogota, Meerut, Saharanpur, Guwahati, Kalyani, Gurgaon, Jabalpur, Dammam, Dehradun, Faridabad, Solapur, Santiago, Indore, Rajkot, Geoje-si, Dallas, Vijayawada, Gujarat, Bihar, Gwalior, Jharkhand, Port-of-Spain, Hyderabad, Manama, Vadodara, Doha, Tripura, Hinganghat, Perth, Maharashtra, Gimhae-si, Chiyoda, Istanbul, Port, Kalyan, Kuwait City, Ankara, Al Khobar, Bhavnagar, London, Jakarta, Akola, Banswara, Nashik, Srinagar, Edmonton, Montreal, Los Angeles, Kolkata, Bundi, Rajasthan, Ballia, New Delhi, Seoul, Navi Mumbai, Mexico City, Madhya Pradesh, Amravati, Toronto, Ghaziabad, Asansol, Coimbatore, Kasganj, Nagaur, Milan, Melbourne, Sadar, Agra, Ranchi, Ernakulam, Chennai, Bhadreswar, Petaling Jaya, Ambattur, Dhanbad, Tadepalligudem, Jaipur, Durgapur, Miryalaguda, Mangalore, Nagapattinam, Ahvaz, Ajmer, Noida, Chhattisgarh, Gujarat, Madurai, Gorakhpur, Moscow, Brisbane, Puducherry, Punjab, Datia, Pune, Siliguri, Mumbai, Benin, Ulhasnagar, Amritsar, Pimpri and Chinchwad, Bhopal, Tehran, Kolapur, Sydney, Gulbarga, Lahore, Ujjain, Kota, Virar, Thane, Uttar Pradesh, Belgaum, Haora, Sharjah, Lucknow, Al Jubail, Kuala Lumpur, Karachi, Hubli and Dharwad, Nagda, Varanasi, Vasai, Bangalore, Surat, Raipur, Visakhapatnam, Bengaluru, Buxar, Jhansi, Bhiwadi.
  • Address
  • Office No. 6, 1st Floor, 26 Durgadevi Street, Mumbai-400004, India
  • Phone
  • + 91 9702472711
  • (+91)22-23824442
  • E-Mail
  • sales@stebersteelind.com